AKY-730Pro
GPS
GPS Positioning Is Not Complete and the Speed Indicator Continues to Flash A flashing speed indicator means that GPS positioning is still in progress. Troubleshooting Steps Move outdoors to an open area with a clear view of the sky. Avoid tall ...
Parking Monitoring, Time-Lapse Recording, and Pre-Recording
Parking Monitoring Does Not Activate Parking monitoring is disabled by default. Enable parking monitoring in the AKEEYO app. Set the G-sensor sensitivity. Fully charge the device. Turn off the AKY-730PRO. In a safe environment, gently shake the ...
Interface and Controls
The Screen Does Not Turn On The device may be in screen-off mode. Press the power button once to turn on the screen. The Touchscreen Does Not Respond Remove any gloves that do not support touchscreen operation. Operate the screen with a dry finger. ...
Device Temperature and Operating Environment
The Device Becomes Warm During Recording The device may become warm during high-resolution recording because the video-processing chip is operating. This is normal. Do not touch the heat-dissipation area on the bottom of the main unit for an extended ...
Firmware and System
The OTA Update Fails Make sure that the battery level is above 50%. Connect the device to an external power source if possible. Make sure that your Wi-Fi connection is stable. Disable any VPN or proxy connection. Restart the update from the ...
Computer Connection and Video Playback
The Computer Does Not Recognize the AKY-730PRO Use a USB cable that supports data transfer. Try another USB cable. Connect the device to a different USB port on the computer. Restart the AKY-730PRO. If the device is still not recognized, remove the ...
Charging and Battery
The Green LED Does Not Light Up Even When the Charging Cable Is Connected The green LED may not light up when the battery is already fully charged. Check the battery level on the main screen or in the AKEEYO app. Use a USB power source that supports ...
microSD Card and Data Storage
The Blue LED Flashes Rapidly and Recording Does Not Start Turn off the device. Reinsert the microSD card in the correct orientation. Back up any important data. Format the microSD card on a computer using FAT32 or exFAT. Reinsert the card into the ...
Wi-Fi and App Connection
The Wi-Fi Network Does Not Appear Turn on the AKY-730PRO. Enable Wi-Fi from the device settings screen. Make sure that the blue LED is lit or flashing. Open the Wi-Fi settings on your smartphone. Check whether 730Pro-** appears in the list of ...
Power On/Off and Startup
The Device Does Not Turn On If the battery level is extremely low or the device has not been used for a long time, low-voltage protection may prevent it from starting immediately. Connect the included charging cable. Charge the device for at least 30 ...
AKY-730PRO Quick Start Guide
This quick start guide is intended for first-time users of the AKY-730PRO. From unboxing and charging to preparing a microSD card, installing the device, connecting to the app, and checking recorded footage, this guide covers the essential steps ...