If Parking Mode does not work after installing the OBD Power Cable or Hardwire Kit, follow these steps.
Troubleshooting Steps
Confirm that you are using a compatible Parking Mode power accessory.
Check that the power cable and device connectors are securely attached.
If using the Hardwire Kit, verify that the power, ground, and ACC connections are correct.
Start your vehicle and connect your smartphone to the XPRO Wi-Fi network.
Open the AKEEYO App and check the available Parking Mode settings.
Turn off the vehicle and check whether the device enters the expected Parking Mode state.
If the issue persists, the power accessory and wiring connections may require further inspection.
If Parking Mode is enabled, the XPRO may remain powered after the vehicle is turned off. This can be normal depending on the selected Parking Mode settings.
If Parking Mode is disabled but the LED indicator remains on, follow these steps.
Troubleshooting Steps
Confirm whether a compatible Parking Mode power accessory is installed.
Open the AKEEYO App and check whether Parking Mode is enabled.
If Parking Mode is not needed, temporarily disable it.
Turn off the ignition, lock the vehicle, and wait approximately 5 minutes to check whether the LED indicator turns off.
If the LED remains on after Parking Mode has been disabled, temporarily disconnect the XPRO power supply and inspect the power connections.
If your vehicle experiences difficulty starting or a discharged 12V battery after being parked overnight or for an extended period, the issue may be related to power consumption after the ignition is turned off.
However, a discharged battery is not necessarily caused by the dash cam. Battery condition and other vehicle accessories may also contribute.
Troubleshooting Steps
If the vehicle's battery is discharged, temporarily disconnect the XPRO and avoid repeatedly attempting to start the vehicle.
Once the vehicle's battery has been sufficiently charged and confirmed to be in good condition, reconnect the XPRO and check the Parking Mode settings.
Check whether Parking Mode is enabled. If it is, temporarily disable it.
Turn off the vehicle and lock it.
Wait approximately 5 minutes and check whether the XPRO LED indicator turns off.

With Parking Mode disabled, the LED turning off within 5 minutes generally indicates that the XPRO has exited its active operating mode.
If the vehicle's battery continues to discharge, check the battery condition and other electrical accessories.
Please note that the LED turning off does not necessarily mean the device has zero standby power consumption. Measuring the actual current draw is necessary to confirm this.

If Parking Mode has been disabled but the LED remains on or continues flashing after 5 minutes, the XPRO may still be receiving power.
Check the power accessory and wiring connections.
If the device continues operating unexpectedly, temporarily disconnect its power supply and arrange further inspection.
Important: If the vehicle has experienced repeated battery discharge, avoid further overnight testing until the battery and power connections have been inspected.If Parking Mode is enabled but recording stops unexpectedly while the vehicle is parked, check the power supply and storage conditions.
Troubleshooting Steps
Check that the Parking Mode power accessory is properly connected.
Make sure the vehicle's 12V battery is in good condition.
Confirm that the microSD card is correctly inserted.
Check whether the microSD card meets the recommended specifications.
Look for signs of unexpected power loss or storage errors.
Check whether the Parking Mode power accessory has stopped supplying power due to battery protection or changes in the vehicle's electrical system, if applicable.
If the issue continues, keep any relevant recordings and device status information for further analysis.
Parking Mode may continue drawing power from the vehicle's low-voltage battery after the ignition is turned off. For most compatible vehicles, this is a 12V battery.

The 12V battery is typically used to start the engine and power the vehicle's electrical systems.

The 12V auxiliary battery mainly powers and activates the vehicle's electronic systems, while the hybrid system handles engine starting.
Some hybrid vehicles have smaller 12V auxiliary batteries, which may be more sensitive to continuous power consumption while parked.
If the battery voltage drops too low, the vehicle may not be able to start or activate its electronic systems.
Note: Battery discharge does not necessarily indicate a fault with the vehicle or dash cam. Battery condition, parking duration, and other electrical accessories may also contribute.