How to Change Wi-Fi Name and Password (AKY-710S/Pro)

How to Change Wi-Fi Name and Password (AKY-710S/Pro)

To update your device's Wi-Fi name (SSID) and password, follow the steps below:

Steps to Change Wi-Fi Settings

  1. Make sure your phone is connected to the device's Wi-Fi and open the AKEEYO app.
  2. Tap “Access Camera” to enter the live view.
  3. Go to Camera Settings.
  4. Scroll down until you see Wi-Fi Name and Wi-Fi Password.
  5. Tap to change either or both fields.
Default Wi-Fi Password: 12345678

⚠️ Important Notes

  • Be sure to remember your new Wi-Fi name and password.
  • If you forget them, you will need to reset the device to factory settings to restore the default Wi-Fi name and password format (AKY-710~ and 12345678).
  • To perform a factory reset and restart your device, please follow these steps:
    1. Ensure the device is in video recording pause mode. 
      1. Here’s how to activate it: Short-press the power button once. The device will vibrate once, and the red indicator light will stop blinking and stay on steadily
    2. Press the button 5 times consecutively.
    3. This will initiate a factory reset and power off the device.
    4. Restart the device after the reset is complete.

    • Related Articles

    • How to Connect to Wi-Fi – AKY-710 Series

      Follow these steps to connect your AKY-710S device to your smartphone via Wi-Fi: Step 1: Turn On Wi-Fi on the Device Press the power button twice quickly on the device. (You will feel 2 short vibrations — this toggles Wi-Fi ON/OFF.) Wi-Fi ON: Blue ...

    • How to Choose the Right AKY-710 Series Model

      Akeeyo offers four versions of the AKY-710 series to meet the needs of different riders: AKY-710Pro-Moto AKY-710Pro-Bicycle AKY-710S-Moto AKY-710S-Bicycle Pro vs. S – What’s the Difference? The only difference between the AKY-710Pro and AKY-710S is ...

    • About EIS (Image Stabilization) on AKY-710Pro

      Electronic Image Stabilization (EIS) can be turned on or off in the AKEEYO app under the camera settings. How to Connect to Wi-Fi – AKY-710 Series Important Notes: EIS is only available when recording at: 4K 30fps 2K 30fps 1080P 30fps EIS is not ...

    • AKY-710s/pro – WiFi Cannot Be Set to Default OFF

      The AKY-710s does not support setting WiFi to be permanently off by default. Power-Saving Behavior To conserve battery, the device features a power-saving mode: If no phone or app is connected within 5 minutes, the WiFi will automatically turn off ...

    • AKY-NV-X Manual Firmware Update Guide

      If your AKY-NV-X requires a manual firmware update, please follow the steps below carefully. This process requires a Windows PC and a microSD card. Before You Start Use a microSD card (8–32GB recommended). Back up any important data on the card — it ...