Battery Specifications & Recording Time (AKY-710Pro)

Battery Specifications & Recording Time (AKY-710Pro)


Video SettingWi-Fi OFFWi-Fi ON
1080P @ 28fps~4.2 hrs~3.3 hrs
1080P @ 30fps~3.5 hrs~3.1 hrs
1080P @ 55fps~4.2 hrs~3.3 hrs
1080P @ 60fps~4.2 hrs~3.1 hrs
2K @ 28fps~4.1 hrs~3.2 hrs
2K @ 30fps~3.5 hrs~3.0 hrs
2K @ 55fps~2.7 hrs~2.4 hrs
2K @ 60fps~3.1 hrs~2.2 hrs
4K @ 28fps~3.4 hrs~2.6 hrs
4K @ 30fps~3.0 hrs~2.3 hrs

Anti-Shake Mode (4K @ 30fps)

Wi-FiEIS (Anti-Shake)Average Recording Time
OFFOFF~3.0 hrs
ONON~2.2 hrs
OFFON~2.6 hrs
ONOFF~2.3 hrs

Additional Specifications

  • Battery Capacity: 1800mAh
  • Charging Time (0–100%, 5V–2A): Approx. 3 hours

šŸ”‹ Actual Recording Time Is Significantly Shorter Than the Reference Value

šŸ” Issue

The device's actual continuous recording time is significantly shorter than the reference battery life shown in the tables above.

For example, under 4K 30fps recording with Wi-Fi OFF and EIS ON, the device may record for only 30–40 minutes, compared with the reference recording time of approximately 2.6 hours for this configuration.

šŸ’” Possible Causes

  • Battery Capacity Degradation: The battery's usable capacity may decrease over time, reducing recording duration.

  • Differences in Recording Settings: Resolution, frame rate, EIS stabilization, and Wi-Fi status all affect power consumption.

  • Operating Temperature: High or low temperatures may affect battery performance.

  • Other Issues: Abnormal battery conditions or power-related problems may also cause recording to stop earlier than expected.

šŸ”„ Troubleshooting Steps

  1. Fully charge the AKY-710Pro using a compatible charger.

  2. Set the device to 4K 30fps, EIS ON, and Wi-Fi OFF.

  3. At normal room temperature, start recording with a fully charged battery and measure the actual continuous recording time.

  4. Compare the result with the reference value of approximately 2.6 hours shown in the table above.

  5. If necessary, turn off EIS and test again. Under 4K 30fps with Wi-Fi OFF and EIS OFF, the reference recording time is approximately 3.0 hours.

  6. If the actual recording time remains significantly shorter than the reference value, record the test results and device status for further investigation.

āš ļø Important Notes

  • The battery life figures in the tables are reference values. Actual results may vary depending on operating conditions.

  • A recording time of only 30–40 minutes should not automatically be considered normal for this configuration.

  • Firmware updates generally cannot restore battery capacity lost through physical battery degradation.

  • For extended recording sessions, consider using a compatible external power source.


Important Notes

  • Battery health will naturally decline over time, reducing recording duration. This is normal battery wear.
  • Avoid prolonged exposure to high temperatures to maintain battery life.
  • For extended recordings, use an external power source to ensure continuous operation.